17.5
Restarting the XLS if the Hardware Configuration was Changed
17-18
501610 Rev. 07-01-19
6.
When the fiducial scan has completed, select
Dump Database
. The results of
the fiducial scan displays, as shown in
Figure 17-12
. This report indicates
whether any of the fiducials in the library are unscanned.
Figure 17-12
Excerpt from the fiducial scan, showing unscanned tape drives
7.
If any of the fiducials display as unscanned, select the appropriate option from
the Fiducial section of the page:
–
Select
I/O Ports
to scan the fiducials on the I/O ports
–
Select
All Slots
to scan the fiducials on the cartridge magazines
–
Select
Tape Drives
to scan and calibrate the tape drives
8.
When the fiducial scans are complete, select
Calibrate All
to calculate the
positions of the fiducials.
9.
If you removed or installed cartridges when replacing the hardware, select
Scan
Inventory
from the Inventory section of the page to scan the cartridges.
10.
Wait for the inventory scan to complete, then select
Sync Inventory
to update
the logical library inventories with the results of the physical library scan.
11.
From the General section of the page, select
Lock Doors
.
12.
Press
Done
to return to the Service portlet.
13.
As required, put the XLS in logical mode. See
Section 5.4.4 on page 5-11
.
Содержание XLS Series
