89
Copyright@2004~2014 Qsan Technology, Inc. All Rights Reserved.
Qsan Document – User Manual
Entity and iSNS Settings
The
Entity and iSNS Settings
tab is used to view the entity name of the system, and setup iSNS IP
for the iSNS (Internet Storage Name Service) protocol. It allows automated discovery,
management and configuration of iSCSI devices on a TCP/IP network. To use iSNS, an iSNS server
needs to be added to the SAN. When this is done, the iSNS server IP address must be added to the
storage system for iSCSI initiator service to send queries to it.
To make changes, enter the
Entity Name
and the
iSNS IP Address
, and then click
Apply
button.
iSCSI Nodes
The
iSCSI Nodes
tab is used to view the target name for iSCSI initiator. The various controllers
support different number of multiple nodes, list on the following:
AegisSAN Q500:
Q500-P10:
Up to 64 multiple nodes per controller.
Q500-P20:
Up to 64 multiple nodes per controller.
Q500-P21:
Up to 64 multiple nodes per controller.
Q500-F20:
Up to 32 multiple nodes per controller.
Q500-F21:
Up to 32 multiple nodes per controller.
Q500-F30:
Up to 32 multiple nodes per controller.
AegisSAN V100:
V100-P10:
Up to 32 multiple nodes per controller.
V100-P20:
Up to 32 multiple nodes per controller.
V100-F30:
Up to 32 multiple nodes per controller.
AegisSAN LX:
P400Q:
Up to 128 multiple nodes per controller.
P600Q:
Up to 128 multiple nodes per controller.
F600Q:
Up to 32 multiple nodes per controller.
F630Q:
Up to 32 multiple nodes per controller.
