Qsan AegisSAN Q500 Series, Руководство пользователя

Страница: 179 / 203

179 Copyright@2004~2014 Qsan Technology, Inc. All Rights Reserved.
Qsan Document – User Manual
INFO SCSI bus reset Received SCSI Bus Reset event at the SCSI Bus <number>
ERROR SCSI host error SCSI Host allocation failed
ERROR SATA enable
device fail
Failed to enable the SATA pci device
ERROR SATA EDMA mem
fail Failed to allocate memory for SATA EDMA
ERROR SATA remap mem
fail Failed to remap SATA memory io space
ERROR SATA PRD mem fail Failed to init SATA PRD memory manager
ERROR SATA revision id
fail Failed to get SATA revision id
ERROR SATA set reg fail Failed to set SATA register
ERROR SATA init fail Core failed to initialize the SATA adapter
ERROR SATA diag fail SATA Adapter diagnostics failed
ERROR Mode ID fail SATA Mode ID failed
ERROR SATA chip count
error SATA Chip count error
INFO SAS port reply
error
SAS HBA port <number> reply terminated abnormally
INFO SAS unknown port
reply error SAS frontend reply terminated abnormally
INFO FC port reply error FC HBA port <number> reply terminated abnormally
INFO FC unknown port
reply error FC frontend reply terminated abnormally
INFO Port linkup The Port <number> link status is changed to Up.
INFO Port linkdown The Port<number> link status is changed to Down.
EMS Events
Level Type Description
INFO Power install Power(<string>) is installed
ERROR Power absent Power(<string>) is absent
INFO Power restore Power(<string>) is restored to work.
ERROR Power fail Power(<string>) is not functioning
WARNING Power detect PSU signal detection(<string>)
INFO Fan restore Fan(<string>) is restored to work.
ERROR Fan fail Fan(<string>) is not functioning
INFO Fan install Fan(<string>) is installed
ERROR Fan not present Fan(<string>) is not present
ERROR Fan over speed Fan(<string>) is over speed
WARNING Thermal level 1 System temperature(<string>) is higher.
ERROR Thermal level 2 System Overheated(<string>)!!!
ERROR Thermal level 2
shutdown System Overheated(<string>)!!! The system will auto-
shutdown immediately.
ERROR Thermal level 2
CTR shutdown The controller will auto shutdown immediately, reason
[ Overheated(<string>) ].
WARNING Thermal ignore
value
Unable to update thermal value on <string>
WARNING Voltage level 1 System voltage(<string>) is higher/lower.
ERROR Voltage level 2 System voltages(<string>) failed!!!
ERROR Voltage level 2
shutdown System voltages(<string>) failed!!! The system will auto-
shutdown immediately.