60
Copyright@2004~2014 Qsan Technology, Inc. All Rights Reserved.
Qsan Document – User Manual
Attach the power cords and power on the system, and then power on the hosts and the iSNS
server (optional for iSCSI environment).
Start the configuration.
Power ON / OFF
Power on the System
AegisSAN Q500 Series and AegisSAN V100 Series:
The power button is located at the right front handle. To turn on the system, you may press power
button once. After you turn the power ON, the system performs a booting process which takes a
few minutes.
AegisSAN Q500
AegisSAN V100
AegisSAN LX Series (2U12 / 3U16 / 4U24):
The power switch is located at the rear of the panel. To turn on the system, you may press power
switch to “|”. After you turn the power ON, the system performs a booting process which takes a
few minutes.
CAUTION:
Be aware that when Controller Health LED is in RED, please DO NOT plug out
the controller from the system or turn off the power suddenly. This may cause
unrecoverable damage, which will not be covered by warranty.
Power off the System
If it becomes necessary to power down the system, it is recommended using a normal, controlled
shutdown form through either the LCM or Web UI to ensure all data is flushed from the cache first.
