109
Copyright@2004~2014 Qsan Technology, Inc. All Rights Reserved.
Qsan Document – User Manual
The options are Do Not Erase, erase First 1GB or Full Disk. The default value is Do Not
Erase.
。
Space Reclaim:
This option is available when the RAID group is thin provisioning. There
are Enabled or Disabled. The default value is Enabled.
。
Fast Rebuild:
This option is available when the RAID group is not RAID 0. There are
Enabled or Disabled. The default value is Disabled.
。
Disk Type:
Select type for normal or backup usage. The options are RAID (for general
usage) and Backup Target (for Clone or QReplica). The default value is RAID.
6.
Click
OK
button to create the virtual disk.
TIP:
In
AegisSAN Q500
, the maximum number of virtual disks in a RAID group
is 96. The maximum host number per virtual disk is 16. The maximum host
number per controller is 64. The maximum virtual disk number in a
system is 2048. The max virtual disk number for snapshot is 32.
In
AegisSAN V100
, the maximum number of virtual disks in a RAID group
is 96. The maximum host number per virtual disk is 16. The maximum host
number per controller is 64. The maximum virtual disk number in a
system is 2048. The max virtual disk number for snapshot is 16.
In
AegisSAN LX
, the maximum number of virtual disks in a RAID group is
96. The maximum host number per virtual disk is 16. The maximum host
number per controller is 128. The maximum virtual disk number in a
system is 4096. The max virtual disk number for snapshot is 64.
CAUTION:
If shutdown or reboot the system when creating a virtual disk, the erase
process will stop.
Snapshots
The
Snapshots
tab provides to create, modify, delete, or view the status of snapshot. The two
drop-down lists at the top enable you to switch the virtual disks. The other is to change the drive
size units (MB or GB).
This table shows the column descriptions.
