127
Copyright@2004~2014 Qsan Technology, Inc. All Rights Reserved.
Qsan Document – User Manual
Column Name
Description
RAID Group Name The original RAID group name.
RAID
The original RAID level.
Virtual Disk
The original virtual disk name.
Volume Size (GB)
The original capacity of the virtual disk.
Disks Used
The original physical disk number of the RAID group.
Disk slot
The original physical disk locations.
Time
The last action time of the virtual disk.
Event Log
The last event of the virtual disk.
The options are available on this tab:
Restore:
Restore the virtual disk of the RAID group.
TIP:
When trying to do data recovery, the same volume configurations as original
must be set and all member disks must be installed by the same sequence as
original. Otherwise, data recovery will fail.
CAUTION:
The data recovery does not guarantee that the lost data can be restored 100%.
It depends on the real operation and the degree of physical damages on disks.
Users will take their own risk to do these procedures.
Reboot and Shutdown
The
Reboot and Shutdown
function is used to reboot or shutdown the system. Before powering
off the system, it is highly recommended to execute
Shutdown
function to flush the data from
cache onto the physical disks. The step is important for data protection.
The Reboot function has three options; reboot both controllers, controller 1 only or controller 2
only.
