167
Copyright@2004~2014 Qsan Technology, Inc. All Rights Reserved.
Qsan Document – User Manual
will take place in such a case.
2.
The other way is to use virtual disk clone function, which is a local data copy function
between virtual disks to execute full copy at the first time. Then move all the physical drives
of the target virtual disk to the target system and then turn the cloning job into replication
task with differential copy afterward.
To do that virtual disk clone transfers to QReplica, please follow the procedures.
1.
Create a clone job on an existing virtual disk with data stored already.
2.
It is better that there is no host connected to the source virtual disk. Then run
Set Clone
,
Start Clone
to synchronize the data between source and target virtual disks.
3.
After the data is synchronized, change the cloning job to a QReplica task. Select the source
virtual disk, and then click
▼
-> Change QReplica Options
.
4.
The
Clone
column of the source virtual disk will be changed from the name of the target
virtual disk into
QRep
.
