162
Copyright@2004~2014 Qsan Technology, Inc. All Rights Reserved.
Qsan Document – User Manual
11.
At this time, if the source virtual disk has no snapshot space, it will be allocated snapshot
space for replication usage automatically. The size will depend on the parameter of
QReplica
Options
.
Start and Stop QReplica Task
To start replication task, please follow the procedures.
1.
In
QReplicas
tab of the source side, select the task, and then click
▼
-> Start
.
2.
Click
OK
button. The source and target virtual disks will take snapshots, and then start
replication.
Figure 5: Source side
Figure 6: Target side
To stop replication task, please follow the procedures.
1.
In
QReplicas
tab of the source side, select the task, and then click
▼
-> Stop
.
2.
Click
OK
button to stop replication.
MPIO
To setup MPIO (Multi Path Input/Ouput) of the replication task, please follow the procedures.
1.
In
QReplicas
tab of the source side, select the task, and then click
▼
-> Add Path
.
2.
Next steps are the same as the procedure of creating a new replication task.
To delete multi path of the replication task, please follow the procedures.
1.
In
QReplicas
tab of the source side, select the task, and then click
▼
-> Delete Path
.
2.
Select the path(s) which want to be deleted, and then click
OK
button.
3.
The multi path(s) are deleted.
