119
Copyright@2004~2014 Qsan Technology, Inc. All Rights Reserved.
Qsan Document – User Manual
Shutdown UPS
The status of shutdown UPS:
ON: The system will send the command to shutdown the connected
UPS if one of the above functions is triggered when the power
outage is happening.
OFF: Disable this function.
IP Address
(
This option is
only visible when
the UPS type is
Smart-UPS
(SNMP).
)
The IP address of the network UPS.
Community
(
This option is
only visible when
the UPS type is
Smart-UPS
(SNMP).
)
The SNMP community of the network UPS.
Status
The status of UPS:
Detecting…
Running
Unable to detect UPS
Communication lost
UPS reboot in progress
UPS shutdown in progress
Batteries failed. Please change them NOW!
Battery level (%)
Current power percentage of battery level.
The system will shutdown either
Shutdown Battery level (%)
or
Shutdown Delay (Seconds)
reaches the condition. User should set these values carefully.
SES
The
SES
(SCSI Enclosure Services, one of the enclosure management standards) tab is used to
enable or disable the management of SES.
The options are available on this tab:
Enable:
Click the
Enable
button to enable SES.
Disable:
Click the
Disable
button to disable SES.
The SES client software is available at the following web site:
