115
Copyright@2004~2014 Qsan Technology, Inc. All Rights Reserved.
Qsan Document – User Manual
Time Created
The created time of the task.
Vendor
The vendor of the target.
Model
The model of the target.
WWN
The WWN of the target virtual disk.
This table shows the
Task Path
column descriptions.
Column Name
Description
No.
Number.
Source NIC
The NIC port of the source side for the replication task.
Target IP
The IP address of the target side.
Target Name
The iSCSI node name of the target side.
LUN
The number of the LUN assigned.
Status
The status of the connection:
Connecting: The replication task pair is connecting.
Connected: The replication task pair is connected.
Disconnected: The replication task pair is disconnected.
Recovering: The replication task pair is reconnecting when it’s
disconnected.
The options are available on this tab:
Create:
Create a replication task.
Rebuild:
Rebuild the replication task which is changed from a cloning job.
QReplica Options:
Set replication options.
Shaping Setting Configuration:
Set task shaping configurations.
The options are available after creating a replication task in the
Task
table:
▼
-> Start:
Start the replication task.
▼
-> Stop:
Stop the replication task.
▼
-> Set Task Shaping:
Set task shaping group.
▼
-> Add Path:
Add multi path for the replication task.
▼
-> Schedule:
Set the replication task by schedule.
▼
-> Delete:
Delete the replication task.
The options are available after creating a replication task in the
Task Path
table:
▼
-> Add Connection:
Add a connection of the replication task.
▼
-> Delete Connection:
Delete the connection for the replication task.
▼
-> Delete:
Delete multi path of the replication task.
More detail is described in chapter 5.
