Processor Technology Sol-PC, Руководство пользователя

Страница: 63 / 284

PROCESSOR TECI~OLOGY CORPORATION
Sal-PC SINGLE BOARD TERMINAL COMPUTER
TM
SECTION III
( ) If the test fails, determine and correct the cause before
proceeding with assembly.
( ) If the Sol—PC passes this test, turn monitor and power
supply off, disconnect power cable, set Switch No. 1 of
S1 to OFF and go on to Step 49.
( ) Step 49. Assemble personality module if you have not yet
done so. (See Section IV.) If you have, go to Step 9 in
Section IV and complete the personality module assembly.
( ) Step 50. Install the following resistors in the indicated
locations. Bend leads Co fit distance between mounting holes,
insert leads, pull down snug to board, solder and trim.
LOCATION VALUE (ohms) COLOR CODE
( ) R21 470 yellow—violet-brown
( ) R22 470, ½ watt “ “ “
( ) R23 470, ½ watt “ “ “
( ) R24 1.5K brown-green—red
( ) R25 10 K brown-black-orange
( ) R26 10 K “ “ “
( ) R27 470 yellow-violet-brown
( ) R28 10 K brown—black-orange
( ) R29 10 K “ “ “
( ) R37 1.5K brown-green—red
( ) R38 1.5K “ “ “
( ) R39 5.6K green-blue-red
( ) R40 1.5K brown-green-red
( ) R42 1.5K “ “ “
( ) R43 1.5K “ “ “
( ) R44 1.5K “ “ “
( ) R45 330 orange-orange-brown
( ) R46 5.6K green-blue-red
( ) R47 10 K brown-black-orange
( ) R48 10 K “ “ “
( ) R49 1.5K brown-green-red
( ) R59 1.5K “ “ “
( ) R61 1.5K “ “ “
( ) R62 5.6K green-blue-red
( ) R63 5.6K “ “ “
( ) R64 330 orange—orange—brown
( ) R65 330 “ “ “
( ) R66 330 “ “ “
( ) R67 330 “ “ “
( ) R68 330 “ “ “
( ) R69 330 “ “ “
( ) R70 330 “ “ “
( ) R71 330 “ “ “
(Step 50 continued on Page III-34.)
III—33