Processor Technology Sol-PC, Руководство пользователя

Страница: 120 / 284

PROCESSOR TECHNOLOGY CORPORATION
Sol OPERATING PROCEDURES SECTION VII
VII-12
Enter Operation. The enter operation is used to enter hexadecimal
data from the keyboard into available Sol memory. As an example, enter
16 bytes of data, starting at address C900 and ending at address C90F,
as follows:
( ) Step 32. Type the ENTER command as follows:
ENTER C900
( ) Step 33. Press RETURN key. The monitor should display a
colon (:) prompt character at the start of the next line.
( ) Step 34. Type the following data:
II 22 33 44 55 66 77 88 99 00 AA BB CC DD EE FF/
NOTE
The slash (/) terminates the enter function.
( ) Step 35. If you made a mistake in typing the above line of
data, refer to Paragraph 7.8.3 on Page VII-25. If you made no
mistakes, press RETURN key.
The data entered in Step 34 now resides in locations C900
through C90F in the Sol memory.
( ) Step 36. To verify that the data did indeed enter Sol memory,
simply give your Sol this DUMP command:
DUMP C900 C90F
Then press RETURN key. The line of data you entered in Step
35 should be displayed on the monitor screen, preceded by the
starting address.
( ) Step 37. Using your SOLOS User's Manual, experiment with the
other commands until you feel at home with your Sol.
The preceding command mode operations used the CPU, personality
module, audio cassette interface (ACI) and the Sol RAM. You have
consequently just tested the functions of these sections.
7.5 OPERATING CONTROLS IN DEPTH
Unless indicated otherwise, the location of the controls
described in this paragraph are shown on the Sol-PC assembly drawing in
Section X, Page X-3.