Processor Technology Sol-PC, Руководство пользователя

Страница: 206 / 284

IV. SET COMMANDS
SOLOS has 10 set commands. They are:
SET S=data Screen character rate
SET I=port Input port to SOLOS
SET O=port Output port to SOLOS
SET N=data Number of NULLS following CRLF
SET XEQ addr Auto-execute addr
SET TAPE 0 or 1 0=1200 baud, 1=300 baud
SET TYPE data Type 'byte' header
SET COUT addr Custom output addr
SET CIN addr Custom input addr
SET CRC data Allows ignoring of tape CRC Read errors
Set Commands In Detail
Set Speed of Display SET S=0-FF
This command determines character display rate to the screen:
data = 0 – Fastest
data = FF – Slowest
Input/Output Command Parameters
The next two SET commands affect SOLOS input and output command
parameters.
Set Out Command SET O=port
This command selects the output driver routine to which SOLOS routes
data. Under SOLOS, COMMAND mode text is always sent to the display
screen. Under CUTER, all output goes to the current Output pseudo
port. In all cases, the output from each command is sent to the
current output pseudo port.
9