Processor Technology Sol-PC, Руководство пользователя

Страница: 190 / 284

PROCESSOR TECHNOLOGY CORPORATION
Sol SOFTWARE SECTION IX
program or file by name. After receiving the TLoad command, CONSOL
turns on the cassette player and waits for the next header, then
uses the header information and loads the file to memory. The cas-
sette recorder must be in play mode and properly connected before
executing the TLoad command.
After loading the data, CONSOL returns to the command mode
where the EXEC command can be used to execute the just loaded pro-
gram. Also, a return can normally be made to the command mode by
pressing the MODE SELECT key. Space limitations again limited es-
cape during the header search, so if the system locks up in this
routine the standard Sol restart must be used. To restart the Sol
press UPPER CASE and REPEAT keys simultaneously.
The CUTS cassette interface electronics within the Sol will
record or receive data at either of two standard speeds. TLoad
will accept a parameter to select this speed, 0 being high speed and
1 being low. (1200 and 300 bits per second respectively). If no
parameter is given CONSOL will default to high speed operation as
all standard Processor Technology Sol-System Software is recorded
at this speed.
9.1.4 EXecute addr
The execute command is used to run programs located in ex-
ternal memory. CONSOL branches to the external routine in a manner
similar to an 8080 CALL instruction so the program can return to the
command mode using a standard 8080 RET instruction if normal stack
operations are used.
9.1.5 BAsic
The BAsic command is provided for executing programs whose
starting address is 0, such as Sol-BASIC5.
9.2 STANDARD I/O ROUTINES
All Sol System personality modules contain similar I/O code
for input/output operations. CONSOL, using 1K of memory, has rou-
tines for KEYBOARD and SERIAL PORT input as well as Serial Commu-
nications Channel and VIDEO DISPLAY OUTPUT. Although the same
code for SOLOS and SOLED contains expanded functions, the I/O
operations appear almost identical when used with external software.
Sol-BASIC5, for example, performs all I/O using the jump
table of the personality modules. Thus, without altering BASIC the
user may output to either the serial port or to the display screen.
Provision is also made within BASIC to programatically change to
any of the four available Input or Output options. CONSOL is of
course limited to the two provided.
IX-3