Polycom RealPresence RMX 4000, Руководство администратора

Страница: 865 / 1101

Ultra Secure Mode
Polycom®, Inc. 834
g Click Yes to proceed.
The system checks the CRL file and displays a message that the certificate was loaded
successfully.
h Repeat Steps d through f until all of the required CRL files has been updated.
Step 4: Update the repository.
When all the CRL files have been updated as described in Step 3.
a Click Update Repository .
A repository update confirmation message is displayed.
b Click OK to update the repository.
Step 5: Re-connect to the RMX.
a Remove the USB device that was connected in Step 2a.
b Restart the RMX.
c In the RMX Management pane, click the Hardware Monitor button.
The Hardware Monitor pane is displayed.
d Click the Reset button.
The RMX restarts. System restart can take 5 - 10 minutes, depending on the RMX’s configuration.
Using the RMX Manager:
e In the MCUs list, select the RMX to be updated.
f Right-click in the MCUs list entry and select Connect .
g Click Accept to accept the warning banner.
h Enter an administrator Username and Password .
i Click OK .
Step 6: Re-enable Secured Communications Mode.
Using the RMX Manager:
a In the RMX Management pane, click the IP Network Services button. (Depending on the RMX
Manager configuration, you may have to click Rarely Used first.)
b In the IP Network Services list pane, double-click Management Network .