Polycom RealPresence RMX 4000, Руководство администратора

Страница: 196 / 1101

Setting Conferences for Telepresence Mode (AVC CP)
Polycom®, Inc. 165
●
When Telepresence Mode is selected in a conference profile, the following options are disabled:
 Borders
 Site Names
 Speaker Indication
 Skins
 Same Layout
 Presentation Mode
 Auto Layout
 Lecture Mode
●
The master (center) camera is used for video, audio and content.
●
Conference Templates can be used to simplify the setting up Telepresence conferences where
precise participant layout and video forcing settings are crucial. Conference Templates :

Save the conference Profile.

Save all participant parameters including their Personal Layout and Video Forcing settings.
●
An ongoing Telepresence conference can be saved to a Conference Template for later re-use.
For more information see
Conference Templates .
●
Telepresence Mode and its associated layouts are not supported by Collaboration Server (RMX)
1800-0.
Automatic Detection of Immersive Telepresence (ITP) Sites
When the conference Telepresence Mode is set to Auto (Default) ITP endpoints are automatically detected.
If an ITP endpoint is detected in such conference, ITP features are applied to all endpoints and the
Collaboration Server sends conference video with the following options disabled:
●
Borders
●
Site names
●
Speaker indication
●
Skins
●
Same Layout
●
Presentation Mode
●
Auto Layout
●
Lecture Mode
The ITP features are dynamic, and if all ITP endpoints disconnect from the conference, normal conference
video is resumed for the remaining all participants. ITP features are re-applied to all participants should an
ITP endpoint re-connects to that conference.
Horizontal Striping
Horizontal Striping is used by the Collaboration Server in order to prevent cropping and preserve the aspect
ratio of video for all Telepresence Modes.