Polycom RealPresence RMX 4000, Руководство администратора

Страница: 898 / 1101

Ultra Secure Mode
Polycom®, Inc. 867

If the system changes its IP addressing mode (e.g. from IPv4 only to both IPv4 &6 ) while the
White List is enabled, the White List is disabled and a message, White list has been disabled
please reconfigure , is displayed.

IPv4 addresses can be added as a range by using the wildcard character, *, to substitute the 3rd
and 4th dotted decimal numbers of the IP address, e.g. 11.10. * . *
a To Add IP addresses:
For each IP address to be added to the White List :
i In the Add IP Address field enter an IP address to be added to the White List and click the
Add button.
If an invalid IP address is entered, an error message is displayed and the administrator is
prompted to enter a correct IP address.
If a duplicate
IP address is entered, a message: Duplicate IP’s are not allowed in WhiteList
is displayed.
ii When all the IP addresses have been added, click OK .
A message is displayed: Applying white list will limit RMX web access to the configured
IP list, are you sure you want to continue?
iii Click Yes to apply the modified White List .
b To Remove IP addresses:
For each IP address to be removed from the White List :
i In the White List , click to select an IP address to be removed from the White List .
Click the Remove button.
ii When all the IP necessary addresses have been removed, click OK .
A message is displayed: Applying white list will limit RMX web access to the configured
IP list, are you sure you want to continue?
iii Click Yes to apply the modified White List .
IP Address Modes
IP Address Modes
RMX Workstation / Device
IPv4
IPv4
IPv4 & IPv6
IPv6
IPv6
IPv4 & IPv6
IPv4 & IPv6
IPv4
IPv6
IPv4 & IPv6