Polaris Light Utility Hauler 6x6 Скачать руководство пользователя страница 75

Страница: 75 / 116

MAINTENANCE AND LUBRICATION

Lubrication Recommendations

Premium 4 Synthetic Lubricant

Polaris Premium 4 All Season Synthetic engine oil (see page 106) has

been specially formulated for use in Polaris 4 cycle engines. It’s a fully

synthetic, high performance, multi-viscosity oil designed to provide the

ultimate in lubrication performance and protection.
Premium 4 possesses unsurpassed film strength over the widest

possible temperature range. It resists viscosity and frictional

breakdown in ambient temperatures from -40

F. to 120

F. Its

exceptional frictional properties result in more efficient operation, more

power output and lower fuel consumption.
Although Polaris Premium 4 is the only oil recommended for use in

this engine, use of any API certified “SH” oil is allowable as long as

it’s 0-40W. Oil may need to be changed more frequently if Polaris

Premium 4 is not used. Follow the manufacturer’s recommendations

for ambient temperature operation.

Oil System

The oil tank is located on the left side of the vehicle. To check the oil:
1. Position the vehicle on a level surface.
2. Start the engine and let it idle for 20-30 seconds.
3. Stop the engine. Remove the dipstick and wipe it dry with a clean

cloth.

4. Screw the dipstick completely in, then remove it and check to see

if the oil level is between the full and add marks.

NOTE:

The

dipstick must be screwed all the way in to keep the angle and depth

consistent.

5. Add oil (see page 106) as

needed to bring the level

to the normal range (1).

Do not overfill.

NOTE:

If oil level rises above the full mark, water and/or fuel may be

collecting in the tank and the oil should be changed.

CAUTION

Mixing brands or using a non-recommended oil may cause serious

engine damage. We recommend the use of Polaris Premium 4 All

Season synthetic oil or API certified “SH” oil, 0-40W. Never

substitute or mix oil brands. Use only 0-40W.

ADD 8 OZ.

NORMAL

FULL

Содержание Light Utility Hauler 6x6





















































































































Результаты поиска

Содержание Light Utility Hauler 6x6

Отзывы:

Похожие инструкции для Light Utility Hauler 6x6

Бренды по названию

Популярные бренды

Polaris Light Utility Hauler 6x6, Руководство пользователя

Результаты поиска

Содержание Light Utility Hauler 6x6

Отзывы:

Похожие инструкции для Light Utility Hauler 6x6

Бренды по названию

Популярные бренды