Polaris Light Utility Hauler 6x6 Скачать руководство пользователя страница 79

Страница: 79 / 116

MAINTENANCE AND LUBRICATION

Engine Cooling System

Radiator Coolant Level

NOTE:

If the cooling system has been drained for maintenance or

repair, replace the coolant. If the recovery bottle has run dry, the level

in the radiator should be inspected. Add coolant as needed (see page

106).
1. Access the radiator pressure cap

by removing the four screws

securing front rack (1). Remove

the front cover (2) by placing

your fingers under the front of

the cover and pulling upward.

2. Remove the pressure cap.
3. Using a funnel, slowly add

coolant as necessary through the

radiator filler neck.

4. Replace the pressure cap and

secure the front cover and rack.

NOTE:

Use of a non-standard pressure cap will not allow the

recovery system to function properly. Contact your dealer for the

correct replacement part.

NOTE:

To ensure that the coolant

maintains its ability to protect the engine, we recommend that the

system be completely drained every two years and a fresh mixture of

antifreeze and water added. Polaris recommends the use of Polaris

Premium 60/40 anti-freeze/coolant or a 50/50 mixture of high quality

aluminum compatible anti-freeze/coolant and distilled water (see page

106). Polaris Premium 60/40 is already premixed and ready to use. Do

not dilute with water.

NOTE:

Always follow the manufacturer’s

mixing recommendations for the freeze protection required in your

area.

WARNING

Escaping steam can cause severe burns. Never remove the

pressure cap while the engine is warm or hot. Always allow the

engine to cool before removing the pressure cap.

Содержание Light Utility Hauler 6x6





















































































































Результаты поиска

Содержание Light Utility Hauler 6x6

Отзывы:

Похожие инструкции для Light Utility Hauler 6x6

Бренды по названию

Популярные бренды

Polaris Light Utility Hauler 6x6, Руководство пользователя

Результаты поиска

Содержание Light Utility Hauler 6x6

Отзывы:

Похожие инструкции для Light Utility Hauler 6x6

Бренды по названию

Популярные бренды