Polaris Light Utility Hauler 6x6 Скачать руководство пользователя страница 18

Страница: 18 / 116

SAFETY

Operator Safety

Safe operation of this rider active vehicle requires good judgement

and physical skills. Persons with cognitive or physical disabilities

who operate this vehicle have an increased risk of overturns and

loss of control, which could result in serious injury or death.

POTENTIAL HAZARD
Carrying a passenger on an LUH 6x6.
WHAT CAN HAPPEN
Carrying a passenger greatly reduces the operator’s ability to

balance and control the vehicle, which could cause an accident

and injury to the operator and/or passenger.
HOW TO AVOID THE HAZARD
Never carry a passenger. The purpose of the long seat is to

allow the operator to shift position as needed during operation.

It is not intended for carrying passengers.

POTENTIAL HAZARD
Operating an LUH 6x6 on paved surfaces, including sidewalks,

paths, parking lots, and driveways.
WHAT CAN HAPPEN
LUH 6x6 tires are designed for off-road use. Operating on paved

surfaces may seriously affect the handling and control of the

vehicle and could result in loss of control, accident, and/or injury.
HOW TO AVOID THE HAZARD
Avoid operating the LUH 6x6 on pavement. If it’s unavoidable,

travel slowly and avoid sudden turns or stops.

WARNING

Содержание Light Utility Hauler 6x6





















































































































Результаты поиска

Содержание Light Utility Hauler 6x6

Отзывы:

Похожие инструкции для Light Utility Hauler 6x6

Бренды по названию

Популярные бренды

Polaris Light Utility Hauler 6x6, Руководство пользователя

Результаты поиска

Содержание Light Utility Hauler 6x6

Отзывы:

Похожие инструкции для Light Utility Hauler 6x6

Бренды по названию

Популярные бренды