Polaris Light Utility Hauler 6x6 Скачать руководство пользователя страница 103

Страница: 103 / 116

101

MAINTENANCE AND LUBRICATION

Lights

Taillight/Brakelight Lamp Replacement

If the taillight/brakelight does not work the lamp may need to be

replaced.

1. Remove the taillight lens cover

mounting screws. Remove the

lens cover and gasket and set

aside for reassembly.

2. Remove the lamp (1) and

replace it with the

recommended lamp.

3. Test the taillight/brakelight to

see that it’s working.

4. Reinstall the gasket and lens cover.

Indicator Lamp Replacement

1. Follow steps 1 - 3 of Headlight

Housing Replacement on page 100.

2. Unplug the light from the harness.
3. Using a screwdriver, turn the light 1/4

turn counterclockwise (1).

4. Install new light and use a screwdriver

to seat it into place, 1/4 turn

clockwise.

5. Reassemble pod.

Содержание Light Utility Hauler 6x6





















































































































Результаты поиска

Содержание Light Utility Hauler 6x6

Отзывы:

Polaris Light Utility Hauler 6x6, Руководство пользователя, Страница: 103 / 116

Результаты поиска

Содержание Light Utility Hauler 6x6

Отзывы: