Polaris Light Utility Hauler 6x6 Скачать руководство пользователя страница 44

Страница: 44 / 116

FEATURES

All Wheel Drive (AWD) System

The Polaris LUH 6x6 is equipped with a unique Polaris exclusive

Demand 6 Drive (AWD) system that’s activated by a switch (1) on the

right handlebar. When the switch is off, the vehicle is in rear wheel

drive at all times. When the switch is on, the vehicle is in AWD and

the front wheels will automatically engage any time the rear wheels

lose traction. When the rear wheels regain traction, the front wheels

will automatically disengage.

NOTE:

The override switch (2) allows

activation of AWD in reverse if the AWD switch is on.
A red AWD light on the switch indicates when the vehicle is in AWD.

There is no limit to the length of time the vehicle may remain in AWD.
The AWD switch may be turned on or off while the vehicle is moving.

If the switch is turned off when the front hubs are driving, they will not

release until the rear wheels regain traction.

Switching to AWD while the rear wheels are spinning may cause

severe drive shaft and hub damage.
Always switch to AWD while the rear wheels have traction.

CAUTION

Содержание Light Utility Hauler 6x6





















































































































Результаты поиска

Содержание Light Utility Hauler 6x6

Отзывы:

Похожие инструкции для Light Utility Hauler 6x6

Бренды по названию

Популярные бренды

Polaris Light Utility Hauler 6x6, Руководство пользователя

Результаты поиска

Содержание Light Utility Hauler 6x6

Отзывы:

Похожие инструкции для Light Utility Hauler 6x6

Бренды по названию

Популярные бренды