Polaris Light Utility Hauler 6x6 Скачать руководство пользователя страница 52

Страница: 52 / 116

OPERATION

Driving Safely

Load Distribution

1. Always load the cargo bed with the load as far forward as possible.
2. Always operate the vehicle with extreme caution whenever hauling

or towing loads. Balance, handling, and control may be affected.

3. Slow down.
4. The cargo bed dump latch must be securely latched before loading

and operating. Unintentional bed tilting will result if weight is

placed in the rear of the bed and the latch is not secured.

Maximum Front Rack
90 lbs. (41 kg)

Maximum Cargo Bed

LUH 6x6 800 lbs. (363 kg)

WARNING

Operating with the cargo bed in the raised position can cause

serious injury and damage to the vehicle. The cargo bed could

close unexpectedly and injure the driver. The rear tires will also

catch the rear of the bed, damaging the vehicle and creating

hazardous driving conditions.
Never operate this vehicle with the cargo bed in the raised position.

Содержание Light Utility Hauler 6x6





















































































































Результаты поиска

Содержание Light Utility Hauler 6x6

Отзывы:

Похожие инструкции для Light Utility Hauler 6x6

Бренды по названию

Популярные бренды

Polaris Light Utility Hauler 6x6, Руководство пользователя

Результаты поиска

Содержание Light Utility Hauler 6x6

Отзывы:

Похожие инструкции для Light Utility Hauler 6x6

Бренды по названию

Популярные бренды