Polaris Light Utility Hauler 6x6 Скачать руководство пользователя страница 35

Страница: 35 / 116

CONTROLS

Electrical Switches and Indicators

With the engine running, verify the function of all indicator lights

before every use of the vehicle.

1 Main Switch

The taillight is on whenever the main switch (key) is in the “on”

position. Turn the key off to prevent battery drain.

2 Light Switch/Hi-Lo Beam Control

The lights won’t turn on unless the main switch is on.

3 Headlight Hi Beam Indicator (blue)
4 Transmission Reverse Indicator (yellow)
5 Transmission Neutral Indicator (green)
6 All Wheel Drive Indicator (red)
7 Engine High Temp Warning Indicator (red)

The high temp indicator will light only if the engine overheats.

Operating the vehicle on streets or roads, especially in darkness,

could result in an accident and serious injury or death.
Your LUH 6x6 is not equipped with highway-approved lights. It’s

designed for and must be used for

off-road use only

. Use caution

and drive at reduced speeds in conditions of reduced visibility such

as fog, rain and darkness.

WARNING

Содержание Light Utility Hauler 6x6





















































































































Результаты поиска

Содержание Light Utility Hauler 6x6

Отзывы:

Polaris Light Utility Hauler 6x6, Руководство пользователя, Страница: 35 / 116

Результаты поиска

Содержание Light Utility Hauler 6x6

Отзывы: