Polaris Light Utility Hauler 6x6 Скачать руководство пользователя страница 65

Страница: 65 / 116

NOISE EMISSION CONTROL SYSTEM

REGULATION

TAMPERING WITH NOISE CONTROL SYSTEM PROHIBITED!
U.S. Federal law prohibits the following acts or the causing thereof:
(1) The removal or rendering inoperative by any person other than for

purposes of maintenance, repair, or replacement of any device or

element of design incorporated into any new vehicle for the purpose of

noise control prior to its sale or delivery to the ultimate purchaser or

while it is in use or
(2) the use of the vehicle after such device or element of design has

been removed or rendered inoperative by any person.
“AMONG THOSE ACTS PRESUMED TO CONSTITUTE

TAMPERING ARE THE ACTS LISTED BELOW.”
1. Removal or alteration or the puncturing of the muffler or any

engine component which conducts removal of engine exhaust

gases.

2. Removal or alteration or the puncturing of any part of the engine

air induction system.

3. Replacement of any vehicle parts with parts not in compliance with

federal regulations.

4. Lack of proper maintenance.

USFS Approved Spark Arrestor

The muffler on this vehicle was tested and approved in accordance with

the USFS Forest Service Standard 5100-1A.

CAUTION

Exhaust system components are very hot during and after use of

the vehicle. Hot components can cause serious burns and can

cause a fire to ignite.
Do not touch hot exhaust system components.
Use caution when traveling through tall grass, especially dry

grass.

Содержание Light Utility Hauler 6x6





















































































































Результаты поиска

Содержание Light Utility Hauler 6x6

Отзывы:

Похожие инструкции для Light Utility Hauler 6x6

Бренды по названию

Популярные бренды

Polaris Light Utility Hauler 6x6, Руководство пользователя

Результаты поиска

Содержание Light Utility Hauler 6x6

Отзывы:

Похожие инструкции для Light Utility Hauler 6x6

Бренды по названию

Популярные бренды