Range Road Enterprises Ltd
Box 944
Eckville AB T0M 0X0
www.range-road.ca
RR607 Trailer
Assembly Manual
1.)
Unpack all pieces from the tub & crate, empty bag with nuts, bolts and pins onto a flat surface.
2.)
Find the main frame, lay on the floor with axle tabs facing up.
3.)
Place the walking beams between the tabs on either side, there is not a right or left, either walking
beam can be used for both sides, line up the hole in the walking beam with the tabs on the frame, push
pin in to hold axles in place.
4.)
Install 13mm bolt & nut washer through the plate on the pin and and the frame tab, tighten nut & Bolt.
Install cotter pin, repeat for the opposite side.
Содержание RR607
Страница 6: ......
