Polaris Light Utility Hauler 6x6 Скачать руководство пользователя страница 40

Страница: 40 / 116

CONTROLS

Engine Fuel and Oil System

The fuel tank filler cap (1) is located directly behind the handlebar.

Tank capacity is 4.25 U.S. gallons (16 liters) with 1/2 gallon (1.9 liters)

in reserve. Use either leaded or unleaded gasoline with a minimum

pump octane number of 87 (R+ M/2) octane.
The fuel tank supply valve (2) is located on the left side of the vehicle

and has three positions:
OFF: For vehicle storage and when

transporting.
ON: For normal operation.
RES: For reserve supply if main supply is

exhausted.

NOTE:

There’s a 7 to 10 mile (11.2 to 16

km) range on reserve gas. Always refill the

gas tank as soon as possible after

exhausting the main supply.
After refueling, switch the fuel valve back to the “on” position for

normal operation.

OFF

RES

Содержание Light Utility Hauler 6x6





















































































































Результаты поиска

Содержание Light Utility Hauler 6x6

Отзывы:

Похожие инструкции для Light Utility Hauler 6x6

Бренды по названию

Популярные бренды

Polaris Light Utility Hauler 6x6, Руководство пользователя

Результаты поиска

Содержание Light Utility Hauler 6x6

Отзывы:

Похожие инструкции для Light Utility Hauler 6x6

Бренды по названию

Популярные бренды