Physio Control LIFEPAK 15 Скачать руководство пользователя страница 17

Страница: 17 / 284

Chapter 2

| Safety Information

LIFEPAK 15 Monitor/Defibrillator Operating Instructions

Possible Electrical Interference

Using cables, electrodes, or accessories not specified

for use with this defibrillator may result in increased

emissions or immunity from electromagnetic or radio

frequency interference (RFI) which could affect the

performance of this defibrillator or of equipment in close

proximity. Use only parts and accessories specified in

these operating instructions.

Possible Electrical Interference

This defibrillator may cause electromagnetic

interference (EMI) especially during charge and energy

transfers. EMI may affect the performance of equipment

operating in close proximity. Verify the effects of

defibrillator discharge on other equipment prior to using

the defibrillator in an emergency situation, if possible.

Possible Equipment Damage

Use only ECG cables that are specified for use with this

device. Protection of the device against defibrillator

discharge is dependent on the use of ECG cables that

are specified by Physio-Control.

Possible Improper Device Performance

Using other manufacturers’ cables, electrodes, power

adapters, or batteries may cause the device to perform

improperly and may invalidate the safety agency

certifications. Use only the accessories that are

specified in these operating instructions.

Possible Improper Device Performance

Changing factory default settings will change the

behavior of the device. Changes to the default settings

must only be made by authorized personnel.

Possible Device Shutdown

Always have immediate access to a spare, fully

charged, properly maintained battery. Replace the

battery when the device displays a low battery warning.

Safety Risk And Possible Equipment Damage

MR unsafe: Keep the defibrillator away from magnetic

resonance imaging (MRI) equipment.

Содержание LIFEPAK 15





























































































































































































































































































Результаты поиска

Содержание LIFEPAK 15

Отзывы:

Похожие инструкции для LIFEPAK 15

Бренды по названию

Популярные бренды

Physio Control LIFEPAK 15, Руководство по эксплуатации

Результаты поиска

Содержание LIFEPAK 15

Отзывы:

Похожие инструкции для LIFEPAK 15

Бренды по названию

Популярные бренды