Physio Control LIFEPAK 15, Руководство по эксплуатации

Страница: 165 / 284

Chapter 7 | Data Management
©2007-2015 Physio-Control, Inc. LIFEPAK 15 Monitor/Defibrillator Operating Instructions
165
EVENT NAME WAVEFORM DATA (WHEN CAPTURED)
PACING X PAUSED Initial 8 seconds while PAUSE is pressed
ALARM* 3 seconds prior to violated parameter and 5 seconds after
EVENT* 3 seconds prior to event selection and 5 seconds after
PRINT 3 seconds prior to pressing PRINT and 5 seconds after
12-LEAD 10 seconds after
12-LEAD
is pressed
SNAPSHOT 3 seconds prior to and 5 seconds after SNAPSHOT requested
VITAL SIGNS 3 seconds prior to and 5 seconds after vital signs are acquired
*To reduce the length of the CODE SUMMARY report, storing waveform data with these events can be set to OFF (see
the LIFEPAK 15 Monitor/Defibrillator Setup Options provided with your device).
Waveform events are preceded by a header that includes the following information:
• Patient data • Vital signs
• Event name • Device configuration information
•
Therapy data*
*Patient impedance (in ohms) appears on shock reports when using disposable defibrillation electrodes. This
impedance is measured just prior to the shock and is used to determine voltage compensation.
The following figures show four examples of waveform events as they would appear in the
CODE SUMMARY report.
Analysis Event