Physio Control LIFEPAK 15 Скачать руководство пользователя страница 283

Страница: 283 / 284

06/2015

Instructions

Recommended

Corrective Action

Date

Initials

•

Press only

one

(shock) button and

release. Confirm that energy was

not discharged.

If energy discharges with one button

press, obtain spare paddles and

repeat check.

•

Press the other (shock) button

and release. Confirm that energy

was not discharged.

•

Press both (shock) buttons and

confirm

ABNORMAL ENERGY

DELIVERY

message appears.

If message does not appear, obtain

spare paddles and repeat check. If

problem continues, remove the

defibrillator from use and contact a

qualified service technician.

•

Remove paddles from wells, and

confirm artifact on screen.

If task fails, obtain spare paddles and

repeat check. If problem continues,

remove the defibrillator from use and

contact a qualified service technician.

•

Place paddle surfaces together, and

confirm flat line on screen.

•

Return paddles securely to paddle

wells.

9. Perform User Test if 3:00 am auto test results not available:

•

Press

OPTIONS

•

Select

USER TEST

in menu.

•

Confirm test results printed.

If User Test fails, remove the

defibrillator from use and contact a

qualified service technician.

10. Check ECG printer for:

Adequate paper supply

Add new paper, if necessary.

Ability to print

If not working, contact a qualified

service technician.

11. If using wireless data transmission, test transmission method:

•

Establish a Bluetooth connection.

If not working, contact a qualified

service technician.

•

Send a test transmission.

12. Turn off defibrillator.

(Press and hold

for up to 2 seconds.)

13. Confirm that the device is stowed, mounted, or positioned securely.

* The defibrillator delivers up to 360 joules of electrical energy. Unless discharged properly, this electrical energy may cause

serious personal injury or death. Do not attempt to perform this test unless you are qualified by training and experience.

** Failure to remove the Test Load may result in delay of therapy during patient use.

*** Discharging > 10 joules in the paddle wells may damage the defibrillator.

Содержание LIFEPAK 15





























































































































































































































































































Результаты поиска

Содержание LIFEPAK 15

Отзывы:

Похожие инструкции для LIFEPAK 15

Бренды по названию

Популярные бренды

Physio Control LIFEPAK 15, Руководство по эксплуатации

Результаты поиска

Содержание LIFEPAK 15

Отзывы:

Похожие инструкции для LIFEPAK 15

Бренды по названию

Популярные бренды