92
21
21
21
65
63
63
63
64
64
65
65
21
21
63
63
21
63
65
65
64
50 m
m
Selecting the Draw-In Profile
Depending on the application, mount the
gap covering on one or both sides of the
climbing enclosure.
Use inner or outer profile rail of Cover
Clip Profile.
Units straight next to each other
Install Draw-In Profile LPS 20/55 (65)
offset on both sides. (Fig. C2.12a)
Alternatively:
Mount Draw-In Profile LPS 18/93 (64)
on one side. (Fig. C2.12b)
For larger spacings, install Draw-in Pro-
file LPS 18/93 (64). (Fig. C2.12c)
C2 On-Site Assembly
Fig. C2.12a
Fig. C2.12d
Fig. C2.12f
Fig. C2.12c
Fig. C2.12b
Fig. C2.12e
Units on internal corners
In the area of the Climbing Rail and en-
closure post, install the Draw-In Profile
LPS 20/55 (65) on both sides on the out-
side. (Fig. C2.12f)
– Drilling screw not always shown.
Components
21
Screen Element DX LPS
63
Cover Clip Profile LPS 110
64
Draw-in Profile LPS 18/93
65
Draw-in Profile LPS 20/55
Units on external corners
In the area of the Climbing Rail:
Mount Draw-In Profile LPS 20/55 (65)
on the inside on both sides. (Fig. C2.12d)
In the area of the platforms:
Mount Draw-In Profile LPS 18/93 (64)
on the inside on both sides. (Fig. C2.12e)
min. 50 mm
max. 100 mm
min. 60 mm
max. 100 mm
min. 60 mm
max. 100 mm
m
in. 5
0 m
m
m
ax. 8
0 m
m
m
in. 8
0 m
m
m
ax. 1
30 m
m
LPS Screen Lightweight Climbing Enclosure
Instructions for Assembly and Use – Standard Configuration