59
12
34
10
840 mm
2
15
m
m
B3 Corner Platforms
Fig. B3.05
For larger building columns at the build-
ing corners, a Rail Guidance Shoe LPS
(12) can be used for the anchoring in the
column. This can take place on one or
both sides. As a result, the cantilevers of
the corner elements are, thus, kept as
small as possible.
Depending on the arrangement of the
slab shoes, change the platform covers
of the Platform LPS. (Fig. B3.05a)
For larger cantilevers, an additional third
Platform Cover (34) can be installed, see
Section B2 Planning of Units - "Platform
Extension" on Page 44.
(Fig. B3.05)
– This version is not covered by the
standard assembly. Additional static
proof for wind loads parallel to the
edge of the building must be provid-
ed.
– In order to make self-climbing possi-
ble, the right height offset from the
Rail Guidance Shoe to the upper slab
edge must be observed. See Section
"Mixed Suspension" on Page 36.
Components
10
Slab Shoe-2 LPS
12
Rail Guidance Shoe LPS
34
Platform Beam LPS
LPS Screen Lightweight Climbing Enclosure
Instructions for Assembly and Use – Standard Configuration