77
72
57
86
57
72.1
50.1
50.2
81, 86
72
50.3
2
C1 Pre-Assembly
Assembly of the Finishing
Platform
1. Assemble Platform Covers, Kickers
and Support Angles to create the fin-
ishing platform, see Section "Covering
with Finishing Platforms" on Page 49.
2. Attach finishing platform to the Tele-
scope Beam (50) that is still turnable
using Bolts ISO 4017 M16x40 (72)
and Nuts (72.1).
3. Insert Bolt Ø 16x36 (57) with Cotter
Pin (86) into the 45° hole of the Sup-
port Angle, thereby preparing the fin-
ishing platform for transport.
(Fig. C1.18a + C1.18b)
4. Position remaining bolts with cotter
pins in the Support Angle.
5. Insert the Telescope Beam (50) with
the suspensions (50.1) into the Climb-
ing Rails (2). The clamping screws
(50.2) of the telescopic tubes point
upwards and inwards.
6. Secure suspensions with 2x Fitting
Pins Ø 21x120 (81) and Cotter Pins
(86) respectively.
7. Completely insert telescopic tubes
(50.3) and secure them with clamping
screws. (Fig. C1.18)
The finishing platforms in the telescoped
area are first mounted on the construc-
tion site.
Components
2
Climbing Rail LPS
50
Telescope Beam Finishing Plat-
form LPS
50.1
Suspension
50.2
Clamping Screw
50.3
Telescopic Tube
57
Bolt Ø 16x36
72
Bolt ISO 7014 M16x40-8.8
72.1
Nut ISO 7040 M16-8
81
Fitting Pin Ø 21x120
86
Cotter Pin 4/1
Fig. C1.18
Fig. C1.18a
Fig. C1.18b
LPS Screen Lightweight Climbing Enclosure
Instructions for Assembly and Use – Standard Configuration