Peri LPS Screen Скачать руководство пользователя страница 118 | Manualshive

Страница: 118 / 172

Peri LPS Screen Скачать руководство пользователя страница 118

116

Safety Instructions

Warning

There is a risk of falling from unse-
cured slab edges.

As a result of the moving procedure,
leading edges are formed between
the platforms.

A fall can result in serious injury or even
death!

⇒

⇒

Mount guardrails before climbing.

⇒

⇒

Areas of risk are to be cordoned off.

⇒

⇒

Use personal protective equipment to
prevent falls.

Warning

Parts of the body can get caught be-
tween the Climbing Rail and Slab Shoe
and become trapped. This can cause se-
rious injury.

⇒

⇒

Do not take hold of anything between
the Rail Guidance Shoes and Climbing
Rails while the climbing enclosure is
moving.

D4 Moving by Crane

The load-bearing capacity of the struc-
tural elements, which carry the
load-transferring Slab Shoes, must be
ensured!

Do not transport persons, building ma-
terials or tools when moving with the
crane. These could fall off and cause
serious injury or even death.

Material or other components must
not protrude beyond the slab edge
This could hinder climbing or fall off.

In the event of a malfunction, the
climbing unit is to be set down in the
next possible position and an author-
ised person is to be informed immedi-
ately!

When climbing by crane, always pro-
vide a safe possibility to attach and
detach crane lifting gear. Additional
double crane slings that remain on the
climbing enclosure may be necessary
until they can be safely dismantled.

LPS Screen Lightweight Climbing Enclosure

Instructions for Assembly and Use – Standard Configuration

«
...
116
117
118
119
120
...
»

Содержание LPS Screen













































































































































































Отзывы:

Нет отзывов