Peri LPS Screen Скачать руководство пользователя страница 107

Страница: 107 / 172

105

16.9

81, 86

0 m

D1 Suspension and Anchoring

Fixing with Embedded Bolts

If bolts and nuts are used to tighten the
guiding bracket:
1. Attach two long Nuts M16x50 (17) 20

mm to Bolts, e.g. M16x120 (15).

2. Secure with other Bolts M16x30 (18)

and Washers (19) in the bracket for
the Anchor Bolt (16.6).

3. Tighten Bolts M16x120.
(Fig. D1.03)

After concrete has hardened

1. Release Slab Anchor Plate from Lead-

ing Anchor and front support.

2. Completely insert the Slab Anchor

Plate.

3. Swivel up the Slab Anchor Template.
4. Pass Fitting Pin through Handgrip

(16.9) and enclosure post (4). Secure
Fitting Pins with Cotter Pins.

5. Protect the thread of the long Nut

M16x50 from dirt by menas of a Bolt
M16.

6. Protect the thread of the embedded

Climbing Anchor from dirt by means
of Bolt M24 or Anchor Positioning
Stud M24.

(Fig. D1.04)

Components

Bolt ISO 4014-M16x120-8.8

Slab Anchor Template-2 LPS

16.9

Handgrip

Nut M16x50

Bolt M16x30

Washer

Fitting Pin Ø 21x120

Cotter Pin 4/1

Fig. D1.03

Fig. D1.04

LPS Screen Lightweight Climbing Enclosure

Instructions for Assembly and Use – Standard Configuration

Содержание LPS Screen













































































































































































Результаты поиска

Содержание LPS Screen

Отзывы:

Peri LPS Screen, Инструкция по сборке и эксплуатации, Страница: 107 / 172

Результаты поиска

Содержание LPS Screen

Отзывы: