manualshive.com logo in svg

Peri LPS Screen, Инструкция по сборке и эксплуатации, Страница: 132 / 172

Поделиться
Скачать
Peri LPS Screen Скачать руководство пользователя страница 132

130

7

99

E 

Dismantling

Removing the Climbing Enclo-
sure

  Warning

As a result of removing the climbing en-
closure, unsecured building edges are 
formed. 
A fall can result in serious injury or even 
death!

⇒

⇒

Install guardrails before removing the 
climbing enclosure.

⇒

⇒

Areas of risk are to be cordoned off.

⇒

⇒

Use personal protective equipment to 
prevent falls.

Preparations

1. Remove connections between the 

climbing enclosures.

2. Dismantle formwork in the area of the 

slab edge. 

3. Mount guardrails (99) on all unsecured 

slab edges.

4. Remove Cover Mats, fold up Foldable 

Covers and secure by sliding laterally 
behind the Climbing Rail.

5. Remove or secure all loose compo-

nents.

6. Install Crane Eye BR-2 2.5 t, see Sec-

tion "Assembly of Attachment Points" 
on Page 69.

7. Install Compression Brace, see Sec-

tion "Moving by Crane" on Page 41.

8. Attach guide ropes to the climbing en-

closure. 

9. Attach crane lifting gear to Crane Eye 

BR-2.

(Fig. E.01)

Fig. E.01

LPS Screen Lightweight Climbing Enclosure

Instructions for Assembly and Use – Standard Configuration

Содержание LPS Screen













































































































































































Отзывы:

Нет отзывов