Panasonic Foma p705im, Инструкция по эксплуатации

Страница: 529 / 554

36
1
“ メニュー (Menu)” of “FOMA PC setup
software”
1
Select “ 通信設定 (Communication
setup)”.
･ 自動設定（推奨） [Auto-setup (recommended)]
The connected FOMA phone is automatically specified. Usually,
select “Auto-setup”.
･ COM ポート指定 (Specifying COM port)
When specifying a COM port number, specify the COM port
number (COM1 through 99) the FOMA phone is connected to.
≥
See page 42 for how to check the COM port number.
2
Click “OK”.
The settings are applied.
This section explains how to make settings for a
high-speed packet communication of 3.6 Mbps maximum.
This setting is for when you use DoCoMo Internet
connection service “mopera U” or “mopera” as a provider.
High-speed packet communication:
You are charged according to the amount of data sent/
received. You can execute data communication without
worrying about time.
High-speed packet communication of up to 3.6 Mbps for
receiving and up to 384 kbps for sending is available.
Note that a communication fee becomes expensive if
you send/receive a large amount of data such as by
browsing web pages having many images, or by
downloading the data.
≥
The communication speed for both sending and receiving is up to
384 kbps for “mopera” connection.
1
Click “
かんたん設定
(Easy Setting)”.
2
Select “
パケット通信
(Packet
communication)”, then click “
次へ
(Next)”.
Confirm that “ パケット通信 (Packet communication)” is checked,
then click “
次へ
(Next)”.
Specify Communication Port
Select Packet Communication from
“
かんたん設定
(Easy Setting)”
Using “mopera U” or “mopera” as an access point
3
Select “ 『 mopera U 』への接続 (Connect to
mopera U)” or “ 『 mopera 』への接続 (Connect
to mopera)”, then click “
次へ
(Next)”.
To use “mopera U”, select “ 『 mopera U 』への接続 (Connect to mopera
U)”. To use “mopera”, select “
『
mopera
』への接続
(Connect to mopera)”.
When “ 『 mopera U 』への接続 (Connect to mopera U)” is selected, the
confirmation display appears asking whether you have signed up for it. If
you have signed up, click “
はい
(YES)”.
≥
See page 37 for using a provider other than “mopera U” or “mopera”.
4
Click “OK”.
≥
The system obtains the access point name (APN) setting from the
FOMA phone connected to the personal computer. Wait for a while.
5
Enter an access point name, then click “ 次へ
(Next)”.
You can specify any name for the currently created connection.
Enter a plain name in the “
接続名 (Access point name)” field.
≥
You cannot enter the following half-pitch characters:
¥, /, :,
¢
, ?, !, <, >, |, and ”.
≥
For the setting of “ 発信者番号通知 (caller ID notification)”, select
“ 設定しない（推奨） [Not set (recommended)]” for overseas use.
≥
“mopera U” supports connection types of both “
PPP接続
(PPP
connection)” and “ IP接続 (IP connection)”. For overseas use,
select “ IP接続 (IP connection)”.
6
Click “
次へ
(Next)”.
If the access point is “mopera U” or “mopera”, you can connect even
if the “
ユーザ名
(user name)” and “
パスワード
(password)” fields are
blank.
7
Confirm the set information, then click “ 完了
(Complete)”.
The set contents are listed on the display. Confirm that there is no
problem on the set contents, then click “
完了 (Complete)”.
≥
To change the set contents, click “ 戻る (Back)”.
≥
If “
デスクトップにダイヤルアップのショートカットを作成する
(Create a dial-up shortcut on the desktop)” is checked, a dial-up
shortcut will be created on the desktop.
8
Click “OK”.
The setting is completed.
Open the dial-up shortcut icon automatically created
on the desktop; then the connection display for
starting communications appears. After confirming that the
connection starts, you can start the Internet browser or mail browser
for communication. (See page 40)