Panasonic Foma p705im, Инструкция по эксплуатации

Страница: 124 / 554

122
Securi
ty Sett
in
gs
You can set the FOMA phone not to work unless you enter your PIN1
code when turning on the power.
1 m
1
Settings
1
Lock/Security
1
UIM setting
1
Enter your Terminal Security Code
1
PIN1 code entry set
1
ON or OFF
1
Enter the PIN1 code.
≥
See page 121 for the PIN1 code.
You need to have set “PIN1 code entry set” to “ON” to change the
PIN1 code.
1
m
1
Settings
1
Lock/Security
1
UIM setting
1
Enter your Terminal Security Code
1
Change PIN1 code or Change PIN2 code
1
Enter the current PIN1 code/PIN2 code.
≥
See page 121 for the PIN1 code/PIN2 code.
2
Enter a new PIN1 code/PIN2 code (four to eight digits).
≥
The entered PIN1 code/PIN2 code is displayed as “_”.
3
Enter the new PIN1 code/PIN2 code again.
UIM Setting
Setting PIN Code
PIN1 Code Entry Set
< >
Change PIN1 Code/Change PIN2 Code
If you enter a wrong PIN1 code/PIN2 code three times in succession
on the display requiring its entry, it is locked and the FOMA phone
cannot be used. In this case, release the PIN1 code/PIN2 code lock
and set a new PIN1 code/PIN2 code.
1
Enter the PUK (PIN unblock code)
(eight digits).
≥
The entered unblock code is displayed as “_”.
2
Enter a new PIN1 code/PIN2 code (four to eight digits).
≥
The entered PIN1 code/PIN2 code is displayed as “_”.
3
Enter the new PIN1 code/PIN2 code again.
If you set Lock All, you can do no operations other than answering
calls and turning on/off the power.
1 m
1
Settings
1
Lock/Security
1
Lock all
1
Enter your Terminal Security Code.
“ ” and “Lock all” appear and Lock All is set.
≥
To release Lock All, enter your Terminal Security Code from the Stand-by
display. Even if you turn off the power, Lock All will not be released.
Releasing PIN Lock
Lock All
Locking your Phone to Prevent Use by
Others
< >