Panasonic Foma p705im, Инструкция по эксплуатации

Страница: 390 / 554

3 88
Network Servi
ces
Set call/receive No.
(Disp. call/receive
No.) You can set the character font of phone numbers displayed on
the Dialing/Call Receiving display, detailed Dialed/Received
Call display, detailed Redial display, and detailed Sent
Chaku-moji Message display for when you make/receive calls
by Number B.
1
Pattern 1 or Pattern 2
Set call/receive No.
(Ringtone set. for
No. B) You can set a ring tone for Number B and a mail ring tone for
Address B.
1
Select an item.
Phone . . . . . . . . .Sets a ring tone for voice calls.
Video-Phone . . .Sets a ring tone for videophone calls.
Mail . . . . . . . . . . .Sets a ring tone for i-mode mail messages
and SMS messages.
1
Select a type of ring tone.
Go to step 3 on page 95.
≥
If you select “Release”, the setting returns to the default.
2in1 function OFF You can deactivate 2in1.
1
YES
Receive avoidance
set.
(Change recv.
avoid.) You can set Receive Avoidance Set. manually for number A
and number B.
1
Change recv. avoid.
1
A number or B number
1
Select an item.
Unchange . . . Does not change Receive Avoidance Set.
Receive . . . . . Receives the calls to the selected phone
number.
Avoid . . . . . . Avoids the calls to the selected phone number.
1 l
( )
≥
When “Mode link” is activated, the confirmation display
appears telling that it is necessary to deactivate it.
Receive avoidance
set.
(Check recv.
avoidance) You can check Receive Avoidance Set.
1
Check recv. avoidance
Item Operation/Explanation
Receive avoidance
set.
(Mode link) You can activate/deactivate Mode Link. When you activate it,
Receive Avoidance Set. automatically changes by linking to
switching of the mode of 2in1; You can receive a call only to
Number A when in A Mode, only to Number B when in B
Mode, and to both Number A and B when in Dual Mode.
1
Mode link
1
YES
Receive avoidance
set.
[Recv. avoid.
(abroad)] You can operate Receive Avoidance Set. from overseas.
1
Recv. avoid. (abroad)
1
YES
1
Operate following the voice guidance.
≥
When “Mode link” is activated, the confirmation display
appears telling that it is necessary to deactivate it.
Information
<Stand-by display>
≥
See “Set Stand-by Display” on page 101 to set the Stand-by display in A Mode.
<Set call/receive No. (Disp. call/receive No.)>
≥
The setting is retained during Personal Data Lock.
≥
See “Change Character Font of Phone Numbers” on page 115 to set the font of
phone numbers displayed for when you make/receive calls by Number A.
<Set call/receive No. (Ringtone set. for No. B)>
≥
See “Select Ring Tone” on page 94 to set a ring tone for Number A and a mail
ring tone for Address A.
≥
If a call comes in to Number B without notifying his/her caller ID, the ring tone set
by “Call setting w/o ID” sounds.
<Receive avoidance set. (Mode link)>
≥
When “Mode link” is activated, you cannot execute “Mode switching” out of the
service area.
Item Operation/Explanation