Panasonic Foma p705im, Инструкция по эксплуатации

Страница: 507 / 554

14
9
Specify “ ユーザー名 (User name)” and “ パス
ワ ード (Password)”, then click “ 次へ (Next)”.
When specifying the user name and password, correctly enter the
information supplied from your Internet service provider, taking care
of uppercase and lowercase letters and so on.
≥
Select a user optionally.
10
Put a check mark for “ 最適化を行う
(Optimize)”, then click “ 次へ (Next)”.
≥
If optimized already, the confirmation display to optimize does not
appear.
11
Confirm the set information, then click “ 完了
(Complete)”.
The set contents are listed on the display. Confirm that there is no
problem on the set contents, then click “
完了 (Complete)”.
≥
To change the set contents, click “ 戻る (Back)”.
≥
If “
デスクトップにダイヤルアップのショートカットを作成する
(Create a dial-up shortcut on the desktop)” is checked, a dial-up
shortcut will be created on the desktop.
12
Click “OK”.
The setting is completed.
Open the dial-up shortcut icon automatically created
on the desktop; then the connection display for
starting communications appears. After confirming that the
connection starts, you can start the Internet browser or mail browser
for communication. (See page 16)
≥
To make the optimization valid, you need to restart the personal
computer.
The 64K data communication is a communication
system you are charged according to the duration of
connection. (Maximum communication speed: 64 kbps)
You can use the DoCoMo Internet access service,
“mopera U”/“mopera”.
1
Click “ かんたん設定 (Easy Setting)”.
2
Select “64K データ通信 (64K data
communication)”, then click “ 次へ (Next)”.
Confirm that “64K データ通信 (64K data communication)” is
checked, then click “ 次へ (Next)”.
3
Select “ 『 mopera U 』への接続 (Connect to
mopera U)” or “
『
mopera
』への接続
(Connect
to mopera)”, then click “
次へ
(Next)”.
To use “mopera U”, select “ 『 mopera U 』への接続 (Connect to
mopera U)”. To use “mopera”, select “
『
mopera
』への接続
(Connect
to mopera)”.
When “
『 mopera U 』への接続 (Connect to mopera U)” is selected,
the confirmation display appears asking whether you have signed up
for it. If you have signed up, click “
はい (YES)”.
≥
See page 15 for using a provider other than “mopera U” or
“mopera”.
4
Enter an access point name, then click “
次へ
(Next)”.
You can specify any name for the currently created connection.
Enter a plain name in the “
接続名 (Access point name)” field.
Confirm that “FOMA P705i μ ” or “PROSOLID μ ” is displayed in the
“ モデムの選択 (Select a modem)” field.
≥
You cannot enter the following half-pitch characters:
¥, /, :,
¢
, ?, !, <, >, |, and ”.
≥
Set whether to notify your caller ID for dial-up connection. You
need to notify your caller ID for connecting to “mopera U” or
“mopera”.
5
Click “
次へ
(Next)”.
If the access point is “mopera U” or “mopera”, you can connect even
if the “
ユーザ名 (user name)” and “ パスワード (password)” fields are
blank.
≥
Select a user optionally.
Select 64K Data Communication from
“
かんたん設定 (Easy Setting)”
Using “mopera U” or “mopera” as an access point