Panasonic Foma p705im, Инструкция по эксплуатации

Страница: 495 / 554

2
The access points for the packet communication and
64K data communication differ. To use the packet
communication, connect to an access point which
supports packet communication. To use the 64K data
communication, connect to an access point which
supports FOMA 64K data communication or ISDN-
synchronous 64K.
≥
You cannot connect to the DoPa access point.
User authentication (ID and password) may be required
at connection to some access points. In this case, enter
your ID and password on the communication software
(dial-up network). ID and password are specified by the
Internet service provider or network administrator of the
access point. For details, contact the provider or
network administrator.
If you need FirstPass (user certificate), install the
FirstPass PC software from the provided CD-ROM and
make the setting.
For details, see “FirstPassManual” (PDF format) in the
“FirstPassPCSoft” folder of the CD-ROM.
To carry out the communication using the FOMA phone
in Japan, the following conditions are required:
・ The personal computer to be used can use the FOMA
USB Cable with Charge Function 01 (option).
・ The PDA to be used should support FOMA packet
communication and 64K data communication.
・ Within the FOMA service area
・ For packet communication, the access point should
support packet communication of the FOMA.
・
For 64K data communication, the access point should
support the FOMA 64K data communication or ISDN-
synchronous 64K.
Even when these conditions are satisfied, if the base
station is congested or the radio wave conditions are
bad, you may not carry out the communication.
Setting access point (Internet service
provider, etc.)
About user authentication for accessing
network
About access authentication for using
browser
Conditions of packet communication and
64K data communication
For the data communication, the following operating
environment is required for your personal computer:
≥
The operation on the upgraded OS is not guaranteed.
≥
The memory requirements and hard disk space size may vary depending
on the system environment.
≥
The recommended environment that the Menu operates is Microsoft
®
Internet Explorer 6.0 or later. When the Menu does not appear after you
set the CD-ROM, operate as follows:
<For Windows XP or Windows 2000>
Refer to the CD-ROM from “
マイコンピュータ
(My computer)”, then
double-click “index.html”.
<For Windows Vista>
Refer to the CD-ROM from “
コンピュータ
(Computer)”, then double-click
“index.html”.
※ For Windows Vista, the recommended environment is Microsoft
®
Internet Explorer 7.0 or later.
About Operating Environment
Item Description
PC main unit PC/AT compatible model
When using the FOMA USB Cable with Charge Function
01 (option): USB port (Universal Serial Bus Specification
Rev1.1 compliant)
Display resolution 800 x 600 dots, high color 16 bits or
more recommended.
OS Windows 2000, Windows XP, Windows Vista
(Japanese version in each)
Memory
requirements
Windows 2000: 64 Mbytes or more
Windows XP: 128 Mbytes or more
Windows Vista: 512 Mbytes or more
(Japanese version in each)
Hard disk
space size
Unused memory space of 5 Mbytes or more
When you set the CD-ROM on your personal computer, an alert
message might appear on the display as shown below. This alert
message appears depending on the security settings of Internet Explorer,
but you can use your computer without any problem.
Click “ はい (YES)”.
※
The example message below is for when you use Windows XP. The
message might differ depending on the environment of the computer
you use.