Panasonic Foma p705im, Инструкция по эксплуатации

Страница: 127 / 554

125
S
e
cu
rity Setti
ng
s
1 m 1
Settings
1
Lock/Security
1
Personal data lock
1
Enter your Terminal Security Code.
“ ” appears and Personal Data Lock is set.
You can set Personal Data Lock also by pressing and holding
for at least one second.
≥
To release Personal Data Lock, perform the same operation. When “Timer
lock ON at close” is set, the display for releasing Personal Data Lock appears
also by opening the FOMA phone.
When you select a function which cannot be used during Personal Data Lock, the
display for entering your Terminal Security Code appears depending on the function.
When you enter your Terminal Security Code, “
” is cleared and you can
temporarily use the function.
≥
When you show the Stand-by display while no menu function is activated, Personal
Data Lock is set again.
To temporally release Personal Data Lock
Information
≥
You can automatically receive Messages R/F, i-mode mail messages, chat mail
messages, and SMS messages during Personal Data Lock; however, the
Receiving or Reception Result display does not appear. Further, the receiving
operation such as ringing/vibration does not work, so you are not notified of
receiving. The icons such as “
”, “ ”, or “ ” appear after Personal Data Lock
is released.
≥
During Personal Data Lock, the “Notification icon” and “Desktop icon” such as
“New mail”, “Missed alarm”, “Phone number”, “URL” and “Mail address” do not
appear, however, they reappear when you release Personal Data Lock.
≥
During Personal Data Lock, you cannot check a missed call or new mail by
pressing
. >
with the FOMA phone closed.
≥
During Personal Data Lock, the “Pre-installed” substitute image is sent to the
other party if you send the substitute image during a videophone call.
≥
If you set “Lock all” during Personal Data Lock, “ ” is cleared and “ ” appears
instead.
1
m
1
Settings
1
Lock/Security
1
Timer lock ON at close
1
Enter your Terminal Security Code
1
Personal data lock or IC card lock
1
Select an elapse time.
If you set to other than “OFF”, “ ” appears and then Timer Lock ON At
Close is set. After each lock is activated, the Lock Release display appears
when you open the FOMA phone.
Timer Lock ON At Close
Setting Lock by Closing the FOMA Phone
< >
Information
≥
When the Stand-by display is not shown, or when another function is working with
the Stand-by display shown, the lock is not activated even after the specified time
elapses. However, when another function ends after closing the FOMA phone,
the lock is activated after the specified time elapses.
≥
When a call or mail message comes in after closing the FOMA phone, or when
you open it, the elapsed time counter returns to 0 seconds.
≥
When this function is activated, the lock is temporarily released if you release
each lock. However, it is re-locked when the specified time elapses after closing
the FOMA phone.