Panasonic Foma p705im, Инструкция по эксплуатации

Страница: 399 / 554

397
PC Co
nn
ecti
o
n
To use the Internet, you need to pay the charge for the Internet service
provider you use. Besides the FOMA service fee, you need to directly pay this
charge to the Internet service provider. For details on the charge, contact the
Internet service provider you use.
You can use the DoCoMo Internet access service, “mopera U”/ “mopera”.
To use “mopera U”, subscription (charged) is required. To use “mopera”,
subscription and monthly charge are not required. However, the maximum
communication speed of sending/receiving data is limited to 384 kbps.
The access points for the packet communication and 64K data communication
differ. To use the packet communication, connect to an access point which
supports packet communication. To use the 64K data communication, connect
to an access point which supports FOMA 64K data communication or
ISDN-synchronous 64K.
≥
You cannot connect to the DoPa access point.
≥
You cannot connect to PHS 64K/32K data communication access point such as
PIAFS.
User authentication (ID and password) may be required at connection to some
access points. In this case, enter your ID and password on the communication
software program (dial-up network). ID and password are specified by the
Internet service provider or network administrator of the access point. For
details, contact the provider or network administrator.
If you need FirstPass (user certificate), install the FirstPass PC software from
the provided CD-ROM and make the setting.
For details, refer to “FirstPassManual” (PDF format) in the “FirstPassPCSoft”
folder on the CD-ROM.
Adobe
®
Reader
®
(version 6.0 or higher is recommended) is required to see
“FirstPassManual” (PDF format). If it is not installed in your personal
computer, install Adobe
®
Reader
®
from the provided CD-ROM to see it.
For details such as how to use it, refer to “Adobe Reader Help”.
Before Using
Charge of Internet service provider
Setting access point (Internet service provider, etc.)
About user authentication for accessing network
About access authentication for using browser
To carry out the communication by using the FOMA phone in Japan, the
following conditions are required:
≥
The personal computer to be used can use the FOMA USB Cable with Charge
Function 01 (option).
≥
The PDA to be used should support FOMA packet communication and 64K data
communication.
≥
Within the FOMA service area
≥
For packet communication, the access point should support packet communication
of the FOMA.
≥
For 64K data communication, the access point should support the FOMA 64K data
communication or ISDN-synchronous 64K.
Even when these conditions are satisfied, if the base station is congested or
the radio wave conditions are bad, you may not carry out the communication.
For the data communication, the following operating environment is
required for your personal computer:
■ PC main unit
PC/AT compatible model
When using the FOMA USB Cable with Charge Function 01 (option):
USB port (Universal Serial Bus Specification Rev1.1 compliant)
Display resolution 8 00 x 600 dots, High Color 16 bits or more recommended.
■ OS
Windows 2000, Windows XP, Windows Vista (Japanese version in each)
■ Memory requirements
Windows 2000: 64 Mbytes or more
Windows XP: 12
8 Mbytes or more
Windows Vista: 512 Mbytes or more
■ Hard disk space size
Unused memory space of 5 Mbytes or more
≥
The operation on the upgraded OS is not guaranteed.
≥
The memory requirements and hard disk space size may vary depending on the
system environment.
Conditions of packet communication and 64K data
communication
About Operating Environment