Panasonic Foma p705im, Инструкция по эксплуатации

Страница: 149 / 554

147
Camera
Cont. shooting set.
(Shot interval)
[Continuous Mode
only]
1
Shot interval
1
Select a shooting interval.
≥
You can set this only in “Auto” of Continuous Mode.
Cont. shooting set.
(Shot number)
[Continuous Mode
only]
1
Shot number
1
Enter the number of photos.
≥
When “Image size” is set to “VGA (640 x 4 8 0)” or “CIF (352 x
2 88 )”, you cannot change “Shot number”.
≥
You can set this only in “Auto” or ”Manual” of Continuous
Mode.
Movie type set
[Movie Mode only]
You can select whether to record both the video and voice, or
one of them when you shoot the moving image.
1
Normal, Video, or Voice
Display size You can set whether to display a moving image or still image in
the original size (Actual size) or to fit to the screen size on the
Finder display.
1
Actual size or Fit in display
Common replay
mode
[Movie Mode only]
You can set a shooting size appropriate for attaching to i-mode
mail.
1
YES
≥
Image Size is set to “QCIF”, File Size Setting is set to “Mail
restrict
’ n (S)”, and Image Quality (Movie Mode) is set to
“Normal”.
Icon You can set whether to display icons.
1
ON or OFF
Memory info You can display the used memory space (estimate)/number of
stored items.
Function menu Operation/Explanation
At Camera
start-up
Normal
Information
<File size setting>
≥
When the “File size setting” is set to “Long time”, “Store in” is set to “microSD”.
<Camera settings>
≥
Note that the image may blur in Night Mode because the exposure takes a longer
time.
≥
If you set “Flicker correction” to “Auto”, it may take a while to automatically adjust
the image quality. In this case, switch to Mode 1 or Mode 2 according to the power
frequency provided in the shooting location.
≥
Even if you change the setting of “Brightness”, “White balance”, “Color mode set”,
or “Focus”, the setting appropriate for each “Photo mode” applies when you
change “Photo mode”.
<Storage setting>
≥
See “Select storage” for how to set a storage location on the microSD memory
card.
≥
If you change “File size setting” to “Long time”, “Store in” is set to “microSD” and
“Storage setting” cannot be operated.
≥
When “Auto save set” is set to “ON”, the image is saved to the latest folder if
“Select storage” is not set or the folder set as a destination folder is deleted.
<Img. stabilizer>
≥
This function is only for decreasing the degree of camera shake, so its effect
differs depending on the subject or condition.
≥
Image Stabilizer might not work effectively in the following cases:
・
When the camera shakes to a great extent
・
When zooming is in use
・ When shooting moving subjects
≥
When “Photo mode” of “Camera settings” is set to “Sports” or “Night mode”, “Img.
stabilizer” becomes invalid.
≥
Residual images might remain in the area where the subject is moving, or noise
might be found in overall area. In that case, set this function to “OFF”.
≥
When this function is activated, the processing time after shooting might be longer
about two seconds due to the processing by Image Stabilizer.