Panasonic Foma p705im, Инструкция по эксплуатации

Страница: 518 / 554

25
13
Click the “ 全般 (General)” tab to confirm the
setting contents.
When two or more modems are connected to your personal
computer, confirm that “
モデム
(Modem) - FOMA P705i
μ
” or “
モデム
(Modem) - PROSOLID μ ” is checked in the “ 接続方法 (Connection
method)” field. If it is not checked, check it. If two or more modems
are checked, click the
button to position the priority level of “
モ
デム (Modem) - FOMA P705i μ ” or “ モデム (Modem) - PROSOLID μ
” to the top or uncheck modems other than “ モデム (Modem) - FOMA
P705i μ ” or “ モデム (Modem) - PROSOLID μ ”.
When “ ダイヤル情報を使う
(Use dial information)” is checked,
uncheck it.
≥
The COM port number allocated to “FOMA P705i μ ” or “PROSOLID μ ”
varies depending on the personal computer you use.
≥
When connecting to “mopera U”, enter “
¢
99
¢¢¢
3#” as the
access point number.
See page 22 for access point numbers other than “mopera U”.
14
Click the “ ネットワーク (Network)” tab, then
carry out respective settings.
In the “ 呼び出すダイヤルアップサーバーの種類 (Type of calling
dial-up server)” field, select “PPP: Windows 95/98/NT4/2000, Internet”.
In the “
この接続は次の項目を使用します
(Use the following items for
this connection)” field, select “
インターネットプロトコル
(TCP/IP)
[Internet protocol (TCP/IP)]”.
You cannot modify the setting of the “QoS
パケットスケジューラ (QoS
packet scheduler)” field; so use the default setting as it is. Next, click “ 設
定 (Setting)”.
Contact your ISP (Internet service provider) or network administrator for
how to set up TCP/IP to connect to a general ISP and so on.
15
Uncheck all the items, then click “OK”.
16
Return to the display in step 14, then click
“OK”.
1
“ スタート (Start)”
1
“ プログラム (Programs)”
1
“ アクセサリ (Accessories)”
1
“ 通信
(Communications)”
1
Open “ ネットワークとダ
イヤルアップ接続 (Network and dial-up
connections)”.
2
Double-click “
新しい接続の作成
(Create a new connection)” in
“ ネットワークとダイヤルアップ接
続 (Network and dial-up connections)”.
3
If the “ 所在地情報 (Address information)”
display appears, enter “ 市外局番 (City code)”,
then click “OK”.
≥
The “ 所在地情報 (Address information)” display appears only when you
first start “ 新しい接続の作成 (Create a new connection)” in step 2.
≥
At the second time or after, the “
ネットワークの接続ウィザード
(Network connection wizard)” display appears instead of this
display. Go to step 5.
4
When “
電話とモデムのオプション
(Phone and
modem options)” appears, click “OK”.
5
When the “ ネットワークの接続ウィザード
(Network connection wizard)” display
appears, click “
次へ
(Next)”.
6
Select “ インターネットにダイヤルアップ接続す
る (Dial-up connect to the Internet)”, then click
“ 次へ (Next)”.
7
Select “
インターネット接続を手動で設定する
か、またはローカルエリアネットワーク
(LAN)
を使って接続します
[Connect to Internet
manually or via the local area network
(LAN)]”, then click “
次へ
(Next)”.
Set Dial-up Network for Windows 2000