Panasonic DA-DU26C Скачать руководство пользователя страница 162

Страница: 162 / 166

Maintenance

Storing the Supplies

150

Print/Copy Cartridge

The Print/Copy Cartridge includes a light sensitive drum, a drum cleaner, and
the Toner Waste Container.

•

Always store the Print/Copy Cartridge in the carton.

•

Store the Print/Copy Cartridge away from direct sunlight, in the following
environment:

•

Temperature = 37-95° F (3-35° C)

•

Humidity = 15-80% RH, with no condensation

•

Avoid hot and humid locations

•

Avoid magnetic fields, such as computer screens and disk drives

•

Keep out of the reach of children

•

Keep the cartridge level,

do not

store on end.

Handling Precautions

•

Never

touch the blue surface of the drum.

Never

hit or rub the drum

surface. If scratched or contaminated with oil from your hand, printing
will be degraded.

•

Do not

allow direct sunlight to strike the drum surface.

•

Do not

attempt to reuse the Toner collected in the toner waste container.

•

Always

keep the Print/Copy Cartridge level.

•

Do not

shake or tilt the cartridge.

Содержание DA-DU26C







































































































































































Результаты поиска

Содержание DA-DU26C

Отзывы:

Похожие инструкции для DA-DU26C

Бренды по названию

Популярные бренды

Panasonic DA-DU26C, Руководство по эксплуатации

Результаты поиска

Содержание DA-DU26C

Отзывы:

Похожие инструкции для DA-DU26C

Бренды по названию

Популярные бренды