Panasonic DA-DU26C, Руководство по эксплуатации

Страница: 64 / 166

Tools Mode
52
Use the following procedure to change a Defaults for Copy setting:
1. Press the
Tools
button on the Copier Control Panel to display the Tools
Main Menu on the Copier Screen.
2. Using the ( )
ARROW
buttons highlight the Admin menu option.
3. Press the
Select
button. Password Input is displayed on the Copier
Screen.
4. Using the Numeric Keypad, enter your Administrator Password. The
numbers display as asterisks (*).
If you make a mistake while entering the password, press the Clear button.
5. Once the correct password is entered, the Administrator Menu is
displayed on the Copier Screen.
6. Use the ( )
ARROW
buttons to highlight the Defaults for Copy option.
7. Press the
Select
button. Defaults for Copy selection is displayed on the
Copier Screen
.
8. Using the ( )
ARROW
buttons, highlight the feature whose defaults
you wish to change.
9. Press the
Select
button. The feature selections are displayed on the
Copier Screen.
10. Use the ( )
ARROW
buttons to highlight a new default setting.
To change the default for the Erase feature, you must enter an erase
measurement using the Numeric Keypad. If you enter a wrong number,
press the
Clear button and enter the correct number.
11. Press the
Select
button. Defaults for Copy selection are displayed on
the Copier Screen. The new default setting displays next to the
appropriate feature.
12. To change the default for another feature, repeat steps 8 through 11.
13. Press
the
Exit
button. The Tools Main Menu is displayed on the Copier
Screen.
14. To exit Tools Mode, press the
Tools
button.