Palas 6798 Скачать руководство пользователя страница 69

Страница: 69 / 110

Operation and settings

6924-en_V1.3_09/20

CLEAR | result(ALL, OIL, SALT, USER, PRESS&FLOW)

Deleting measurement results or operator input from current display.

Valid values for parameter 1
| result(ALL, OIL, SALT, USER,
PRESS&FLOW)

Meaning

ALL

All measurement results and opera-
tor input.

OIL

Measurement results for oil aerosol.

SALT

Measurement results for saline
aerosol.

USER

Operator’s reply to a question.

PRESS&FLOW

Values for pressure and flow rate of
breath resistance testing.

REPORT | type(SALT, OIL, BR) | type(OPEN, PRINT, OPEN&PRINT)

Function: Creation of a test report as PDF file with editing options.

Valid values for parameter 1
| type(SALT, OIL, BR)

Meaning

SALT

Measurement results for saline
aerosol.

OIL

Measurement results for oil aerosol.

Values for pressure and flow rate of
breath resistance testing.

Valid values for parameter 2
| type(OPEN, PRINT,
OPEN&PRINT)

Meaning

[blank]

PDF is only saved.

OPEN

Opens the PDF file created.

Prints the PDF file created (printing
on the set standard printer).

OPEN&PRINT

Opens and prints the PDF file cre-
ated (printing on the set standard
printer).

Содержание 6798















































































































Результаты поиска

Содержание 6798

Отзывы:

Palas 6798, Руководство по эксплуатации, Страница: 69 / 110

Результаты поиска

Содержание 6798

Отзывы: