SECTION 3 – MACHINE CONTROLS, INDICATORS AND OPERATION
3-44
– JLG Lift–
Lifting
When lifting the machine:
- Platform must be fully lowered in the stowed position.
- Remove all loose items from the machine.
- Attach lifting straps/chains at BOTH lifting lugs as shown in
Figure 3-22. Lifting the Machine
The machine may also be lifted using a fork truck:
- Fully lower the mast and the jib.
- Position the platform in line with the chassis with the jib over the
rear axle.
- Fork lift as shown in Figure 3-23.
VERIFY THE CAPACITY OF THE FORK TRUCK AND OF ITS EQUIPMENT.
FORK LIFT ONLY AT THE DESIGNATED POINTS.
WHEN DRIVING THE FORK TRUCK, KEEP THE WORK PLATFORM AS NEAR TO
THE GROUND AS POSSIBLE (BUT WITH A SUFFICIENT CLEARANCE FOR THE
WHEELS NOT TO CONTACT THE GROUND).
Figure 3-23. Lifting the Machine Using a Fork Truck
To
order
go
to
Discount-Equipment.com
