SECTION 5 – GENERAL SPECIFICATIONS AND MAINTENANCE
– JLG Lift –
5-19
5.7
OIL LEVEL/OIL FILTER - 10E/26E
NOTE:
Care should be taken not to introduce any impurities (dirt, water etc.) while
cap or plug is removed.
Hydraulic Oil Check
Lube Point - Hydraulic Tank
Reservoir Capacity: 6 liters
Lube - Hydraulic Oil (See Table 5-8)
Interval - Check Daily
NOTE:
Check oil level with the wheels fully steered to the left.
1.
Open the access door to the
hydraulic power unit (1)
.
2.
Locate the
decal (2)
on the
tank (3)
.
3.
The oil level in the tank must be within the MIN (mini
-
mum) and Max (maximum)
markings (4)
of the decal.
4.
If additional oil is required, wipe all dirt and debris
from the
filler/breather cap (5)
area, add proper
grade of oil by using a funnel. Fill until oil level is
between the MIN and MAX
markings (4)
.
Figure 5-8. Hydraulic Oil Check - 10E/26E
To
order
go
to
Discount-Equipment.com
